It is possible that the internal MasterMind display battery has discharged. This means it needs to be charged for the bike to power on initially
Connect a powered USB-C cable to the display to check the charge of the internal display battery
Once you have plugged it in, the display will power on, but it is advisable to keep the MasterMind display connected to a charge source for about 30 minutes
At this point in time, it is also advisable to:
Inspect the MasterMind TCU
Check for signs of water ingress
Check the USB C plug is in place and sealed
If not sealed correctly, check ports for water ingress and corrosion
Inspect the cables for any signs of damage and corrosion
Check the connectors are secure
Disconnect the remote and, if applicable, the light splitter from the TCU
Notes:
– MasterMind display batteries of new bikes/displays can be discharged or when the bike/display has been stored for a long period of time without riding or USB-charging
– Riding the bike powered on always charges the internal MasterMind battery
– Fully charging the internal MasterMind display battery will take up to 1.5 hours